TADEA .................................. Lonworks®

Building Automation - Intelligent buildings - Networked Control - Fieldbus - however you title or name it one of our particular areas of expertise is in designing and producing Lonworks® based products.

If you have a specific requirement or just an idea for various bits of equipment that need to communicate or be controlled over a network, then talk to us about Lonworks® and what it and us can do for you.

It may be that you need a custom design implementation or you may be able to use some off the shelf product. We can assist in both cases, below are listed some of the standard product that has been designed by us. For availability and prices please contact the office.

Please bear in mind that most products will probably require some form of custom software to complete their functionality in your project.


Products

These modules provide a Repeater function between 2 networks that can talk to FTT10A nodes. Housed in a plastic box (85x85x42) with universal entry seals making cable entry easy (no drilling required), made of non-flammable pvc-free construction and rated at IP54. Mounting holes in base of the box allows for wall or fixed mounting. AT1000 is powered from the mains supply (nominal 230Vac) and the AT1100 is powered from a dc source (nominally 12V). All connections are via screw terminal blocks.

The 2 inputs are switched by taking the input high to +12V (12V is provided by connectors onboard), the outputs are relays providing NC and NO outputs, capable of switching 6A at 250Vac. Housed in a plastic box (85x85x42) with universal entry seals making cable entry easy (no drilling required), made of non-flammable pvc-free construction and rated at IP54. Mounting holes in base of the box allows for wall or fixed mounting. The module is powered from a dc source (nominally 12V). All connections are via screw terminal blocks.

As per AT1200, but providing 4 switched inputs and 4 Relay outputs. There are 2 box sizes available AT1300 is a plastic box (113x113x58) with universal entry seals making cable entry easy (no drilling required), made of non-flammable pvc-free construction and rated at IP54. Mounting holes in base of the box allows for wall or fixed mounting. AT1301 is a polycarbonate enclosure rated at IP67 with PG knockouts for easy cabling and is 125x125x75mm.

The module provides a conversion function from the UTP network to a simple RS232 serial protocol at speeds from 600 to 120k baud. Housed in an attractive plastic box (90x50x24) made of flame retardant UL94V-0 plastic. The unit is powered from a 12Vdc source and connects to the module via a jack socket. The RS232 connector is a standard 6 way mini din type socket, and the network connector is a plug in terminal block. A cable converting the mini din to a standard 9 way D type is also avaialble separately.

For the slower applications, this module has all the features of the AT1400, but only goes up to 4800 baud. It benefits from having a lower price though.

8 Inputs each activated by taking the input to +12v (provided by onboard connector), the 8 outputs are open collector darlington transistors, each capable of sinking 500mA (but with a total load of 2W at 50 degrees C). There are 2 box sizes available AT1600 is a plastic box (113x113x58) with universal entry seals making cable entry easy (no drilling required), made of non-flammable pvc-free construction and rated at IP54. Mounting holes in base of the box allows for wall or fixed mounting. AT1601 is a polycarbonate enclosure rated at IP67 with PG knockouts for easy cabling and is 125x125x75mm. All connections are via screw terminal blocks.

This module receives the Atomic Clock time signals as generated by the MSF transmission from Rugby in the UK. The time received is used to update a Real Time Clock IC in the module, so in the event of loss of transmission, time is still maintained by the RTC device. The unit is also battery backed, so that any loss in a power supply does not lose the time information. AT1700 is powered from the mains supply (nominal 230Vac) and the AT1800 is powered from a dc source (nominally 12V). All connections are via screw terminal blocks. The AT1700 and AT1800 are available in a polycarbonate enclosure rated at IP67 with PG knockouts for easy cabling and is 125x125x75mm. The AT1800 is plastic box (113x113x58) with universal entry seals making cable entry easy (no drilling required), made of non-flammable pvc-free construction and rated at IP54. Mounting holes in base of the boxes allows for wall or fixed mounting. All connections are via screw terminal blocks. The time can either be requested from the module or it can send the time out at regular intervals Note- for the unit to work it has to be sited in a postion to receive the signal correctly.

This unit consists of a power supply and a repeater to enable you to construct Link Power based networks without having to use separate power supply, interface units and repeaters. The unit supplies up to 2A to the network, is housed in a robust metallic housing, providing easy cabling and fixings.

8 Inputs each activated by taking the input to +12v (provided by onboard connector). There are 2 box sizes available AT2000 is a plastic box (113x113x58) with universal entry seals making cable entry easy (no drilling required), made of non-flammable pvc-free construction and rated at IP54. Mounting holes in base of the box allows for wall or fixed mounting. AT2001 is a polycarbonate enclosure rated at IP67 with PG knockouts for easy cabling and is 125x125x75mm. All connections are via screw terminal blocks.

The 8 outputs are open collector darlington transistors, each capable of sinking 500mA (but with a total load of 2W at 50 degrees C). There are 2 box sizes available AT2100 is a plastic box (113x113x58) with universal entry seals making cable entry easy (no drilling required), made of non-flammable pvc-free construction and rated at IP54. Mounting holes in base of the box allows for wall or fixed mounting. AT2101 is a polycarbonate enclosure rated at IP67 with PG knockouts for easy cabling and is 125x125x75mm. All connections are via screw terminal blocks.

Each unit comes with easy to install instructions, alternatively, we can provide an installation service. Your installation may well have specific requirements, please contact us to discuss whether our standard product will suffice or whether any customisation is necessary. The IP67 boxes are also available without the PG knockouts (rated at IP65), with additional wall fixing kits and also in UL and EX rating enclosures.



Whether you want to use all or some of our services we don't mind - contact us with your requirements or problems to see if we can help.


E-Mail Sales@Tadea.co.uk

All registered trademarks noted. Copyright Tadea 1998. E&OE